timescaledb – PostgreSQL does not start: FATAL: xlog flush request is not satisfied — flushed only to 0

I have a Docker PostgreSQL (TimescaleDB) developer instance with a local Linux volume mapping.

version: '3'
services:
  dex-timeseriesdb:
    image: timescale/timescaledb:latest-pg12
    # https://stackoverflow.com/a/56754077/315168
    shm_size: 1g
    container_name: dex-timeseriesdb
    environment:
      POSTGRES_USER: postgres
    volumes:
       - $PWD/data/postgresql:/var/lib/postgresql/data

After unclean shutdown the instance no longer starts with FATAL: xlog flush request 0/2CEFA910 is not satisfied --- flushed only to 0/1B48258 error:

dex-timeseriesdb    |
dex-timeseriesdb    | PostgreSQL Database directory appears to contain a database; Skipping initialization
dex-timeseriesdb    |
dex-timeseriesdb    | 2021-06-13 18:50:47.330 UTC (1) LOG:  starting PostgreSQL 12.6 on x86_64-pc-linux-musl, compiled by gcc (Alpine 10.2.1_pre1) 10.2.1 20201203, 64-bit
dex-timeseriesdb    | 2021-06-13 18:50:47.330 UTC (1) LOG:  listening on IPv4 address "0.0.0.0", port 5432
dex-timeseriesdb    | 2021-06-13 18:50:47.330 UTC (1) LOG:  listening on IPv6 address "::", port 5432
dex-timeseriesdb    | 2021-06-13 18:50:47.336 UTC (1) LOG:  listening on Unix socket "/var/run/postgresql/.s.PGSQL.5432"
dex-timeseriesdb    | 2021-06-13 18:50:47.486 UTC (21) LOG:  database system shutdown was interrupted; last known up at 2021-06-13 18:47:35 UTC
dex-timeseriesdb    | 2021-06-13 18:50:49.629 UTC (21) LOG:  database system was not properly shut down; automatic recovery in progress
dex-timeseriesdb    | 2021-06-13 18:50:49.645 UTC (21) LOG:  redo starts at 0/1B46C68
dex-timeseriesdb    | 2021-06-13 18:50:49.648 UTC (21) LOG:  invalid record length at 0/1B48258: wanted 24, got 0
dex-timeseriesdb    | 2021-06-13 18:50:49.648 UTC (21) LOG:  redo done at 0/1B48220
dex-timeseriesdb    | 2021-06-13 18:50:49.697 UTC (21) LOG:  request to flush past end of generated WAL; request 0/2CEFA910, currpos 0/1B48258
dex-timeseriesdb    | 2021-06-13 18:50:49.697 UTC (21) CONTEXT:  writing block 0 of relation base/13455/16573_vm
dex-timeseriesdb    | 2021-06-13 18:50:49.697 UTC (21) FATAL:  xlog flush request 0/2CEFA910 is not satisfied --- flushed only to 0/1B48258
dex-timeseriesdb    | 2021-06-13 18:50:49.697 UTC (21) CONTEXT:  writing block 0 of relation base/13455/16573_vm
dex-timeseriesdb    | 2021-06-13 18:50:49.701 UTC (1) LOG:  startup process (PID 21) exited with exit code 1
dex-timeseriesdb    | 2021-06-13 18:50:49.701 UTC (1) LOG:  aborting startup due to startup process failure
dex-timeseriesdb    | 2021-06-13 18:50:49.744 UTC (1) LOG:  database system is shut down

This is likely data corruption due to unclean Docker shutdown.

There is nothing important in the database. However, I would still like to learn if it is possible to recover the database in situations like this, instead of rebuilding it from the scratch or restoring from a backup.

I tested that the volume mapping is writable within the Docker instance using shell, so that should not be an issue.

See also similar question regarding FATAL: xlog flush request, but slightly different error.

sql server – A fatal PeopleCode SQL error occurred. Please consult your system log for details

sql server – A fatal PeopleCode SQL error occurred. Please consult your system log for details – Database Administrators Stack Exchange

magento2 – phpunit.rest.xml fatal error could not read “”

I am trying to run the Magento web api tests by running the following command:

vendor/bin/phpunit --config ./dev/tests/api-functional/phpunit_rest.xml

But it gives this error:

PHP Fatal error:  Uncaught PHPUnitFrameworkException: Could not read "".

/var/www/osp.example.com/magento-headless/Magento2/dev/tests/api-functional/testsuite/Magento/WebApiTest.php:39
/var/www/osp.example.com/magento-headless/Magento2/vendor/phpunit/phpunit/phpunit:61

  thrown in /var/www/osp.example.com/magento-headless/Magento2/vendor/phpunit/phpunit/src/Util/Xml.php on line 135

After a lot of debugging, I see that WebpApiTest.php runs the function getConfigurationFile which gives back an empty string. This is the code of that function:

    /**
     * Returns config file name from command line params.
     *
     * @return string
     */
    private static function getConfigurationFile(): string
    {
        $params = getopt('c:', ('configuration:'));

        $longConfig = $params('configuration') ?? '';
        $shortConfig = $params('c') ?? '';

        return $shortConfig ? $shortConfig : $longConfig;
    }

I don’t really get what its doing and which information it is supposed to return.
Can anyone check what kinda information it is supposed to return? Maybe then I can fix it and run the webapi tests of Magento 2.

A fatal error occurred while creating a TLS client credential. The internal error state is 10013 in Windows Server 2019

In Windows Server 2019 I installed SharePoint 2016
In Event Viewer Administration section there are may TLS errors and below is details
how to fix this error
A fatal error occurred while creating a TLS client credential. The internal error state is 10013.

enter image description here

Git: Usei as credenciais erradas e agora quando tento baixar o repositório SSH, dá fatal

Falal; Could not read from remote repository

Ao tentar baixar repositorio em SSH, preenchi as credenciais erradas e agora só aparece esse erro:

a assinatura falhou: o agente recusou a operação
git@gitlab.idwall.space: Permissão negada (publickey, teclado interativo).
fatal: não foi possível ler do repositório remoto.

Certifique-se de que possui os direitos de acesso corretos
e o repositório existe.

Tentei fazer outra chave SSH, porém não deu certo. O que posso fazer para conseguir clonar o repositório da forma correta?

AndroidRuntime: FATAL EXCEPTION: m: Can’t convert object of type java.lang.String to type com.example.studentdatabase.Student

public void onStart() {
    databaseReference.addValueEventListener(new ValueEventListener() {
        @Override
        public void onDataChange(@NonNull DataSnapshot dataSnapshot) {
            studentArrayList.clear();
            for(DataSnapshot dataSnapshot1 : dataSnapshot.getChildren())
            {

** getValue error in this line**
Student student =dataSnapshot1.getValue(Student.class);

               studentArrayList.add(student);

            }
            recyclerView.setAdapter(customAdapter);

        }

       

xiaomi – “FATAL ERROR: Unable to parse input tree” during kernel compilation

I am attempting to compile this kernel for my Redmi Note 9S.

I am using this release of AOSP’s clang and this release of AOSP’s gcc to cross-compile on an x86_64 host for the ARM64 target.

My .config file was obtained from /proc/config.gz on my phone and the kernel accepts it without needing any changes.

Here is my PATH:
/home/conner/xiaomi2/toolchain/clang/bin:/home/conner/xiaomi2/toolchain/gcc/bin:/usr/local/lib/node/nodejs/bin:/home/conner/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin

And here is the command used to compile the kernel:
ARCH=arm64 CLANG_TRIPLE=aarch64-linux-gnu- CROSS_COMPILE=aarch64-linux-android- make CC=clang KCFLAGS=-fPIC KCPPFLAGS=-fPIC O=out

Compilation continues without error until:

Error: ../arch/arm64/boot/dts/qcom/dsi-panel-rm69299-visionox-amoled-fhd-plus-video.dtsi:13.1-10 syntax error
FATAL ERROR: Unable to parse input tree

Full error:

  LD      vmlinux
  SORTEX  vmlinux
  SYSMAP  System.map
  DTC     arch/arm64/boot/dts/qcom/apq8016-sbc.dtb
  DTC     arch/arm64/boot/dts/qcom/apq8096-db820c.dtb
  DTC     arch/arm64/boot/dts/qcom/ipq8074-hk01.dtb
  DTC     arch/arm64/boot/dts/qcom/msm8916-mtp.dtb
  DTC     arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dtb
  DTC     arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dtb
  DTC     arch/arm64/boot/dts/qcom/msm8996-mtp.dtb
  DTC     arch/arm64/boot/dts/qcom/atoll-ab.dtb
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/oledb@e000 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/ab@de00 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/ibb@dc00 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l1@4000 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l2@4100 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l3@4200 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l4@4300 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l5@4400 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l6@4400 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (reg_format): "reg" property in /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l7@4400 has invalid length (2 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/oledb@e000
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/oledb@e000
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/ab@de00
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/ab@de00
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/ibb@dc00
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/qcom,spmi@c440000/qcom,pm6150l@5/qcom,amoled/ibb@dc00
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l1@4000
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l1@4000
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l2@4100
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l2@4100
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l3@4200
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l3@4200
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l4@4300
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l4@4300
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l5@4400
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l5@4400
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l6@4400
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l6@4400
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l7@4400
arch/arm64/boot/dts/qcom/atoll-ab.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@a8c000/qcom,pm8008@9/qcom,pm8008-regulator/qcom,pm8008-l7@4400
  DTC     arch/arm64/boot/dts/qcom/atoll-ab-atp-overlay.dtbo
Error: ../arch/arm64/boot/dts/qcom/dsi-panel-rm69299-visionox-amoled-fhd-plus-video.dtsi:13.1-10 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.dtbo:24: recipe for target 'arch/arm64/boot/dts/qcom/atoll-ab-atp-overlay.dtbo' failed
make(3): *** (arch/arm64/boot/dts/qcom/atoll-ab-atp-overlay.dtbo) Error 1
../scripts/Makefile.build:676: recipe for target 'arch/arm64/boot/dts/qcom' failed
make(2): *** (arch/arm64/boot/dts/qcom) Error 2
arch/arm64/Makefile:187: recipe for target 'dtbs' failed
make(1): *** (dtbs) Error 2
make(1): Leaving directory '/home/jordan/Xiaomi_Kernel_OpenSource/out'
Makefile:146: recipe for target 'sub-make' failed
make: *** (sub-make) Error 2

I have verified the md5sum of the .dtsi file as well it is not a matter of file corruption.

Erro fatal ao construir um Modelless Form CakePHP

Estou tentando construir um Modelless Form no CakePHP 4.x, seguinto oo rito do Cook Book mas retorna um erro:
Fatal error: Declaration of AppFormContactForm::_buildSchema(CakeFormSchema $schema) must be compatible with CakeFormForm::_buildSchema(CakeFormSchema $schema): CakeFormSchema in C:xampphtdocstestsrcFormContactForm.php on line 12

Fatal error: Uncaught Error: Call to undefined method WP_Error::has_errors()

I tried to install a “NEVE” theme and got this error. Not knowing how to fix it. Please help how this can be fixed.
The goal I want to achieve is to bring back the theme I used before, namely the original WordPress theme 2017. Let me clarify that the problem happened the day before.
The places where are added dots “….” are from me.

Fatal error: Uncaught Error: Call to undefined method WP_Error::has_errors() in /home/…../addon_domains/…../wp-content/themes/neve/functions.php:81
Stack trace: #0 /home/…../addon_domains/…../wp-settings.php(425): include() #1
/home/…../addon_domains/…../wp-config.php(103): require_once(‘/home/concretec…’) #2 /home/…../addon_domains/…../wp-load.php(37): require_once(‘/home/concretec…’) #3 /home/…../addon_domains/…../wp-blog-header.php(13): require_once(‘/home/concretec…’) #4 /home/…../addon_domains/…../index.php(17): require(‘/home/concretec…’) #5 {main} thrown in /home/…../addon_domains/…../wp-content/themes/neve/functions.php on line 81

commerce – Resolving: Fatal error: Class ‘CommerceGuysAddressingAddressFormatAddressFormatRepository’

The address module was installed using Ludwig.

I have tried to update the module but I cannot as the site gives me this error and the site install has not been done via composer.

Everything was working fine until an unrelated module was installed.

Full error message:

Fatal error: Class 'CommerceGuysAddressingAddressFormatAddressFormatRepository' not found in modulescontribaddresssrcRepositoryAddressFormatRepository.php on line 16

Been stuck on this for some time and would appreciate any advice. Most information out there involves using composer to resolve the issue, unfortunately the site is not using composer and the address module was installed using Ludwig.

DreamProxies - Cheapest USA Elite Private Proxies 100 Private Proxies 200 Private Proxies 400 Private Proxies 1000 Private Proxies 2000 Private Proxies ExtraProxies.com - Buy Cheap Private Proxies Buy 50 Private Proxies Buy 100 Private Proxies Buy 200 Private Proxies Buy 500 Private Proxies Buy 1000 Private Proxies Buy 2000 Private Proxies ProxiesLive Proxies-free.com New Proxy Lists Every Day Proxies123