recovery mode – How can i fix “this rom is for A5ulte, a5ultxx… your phone is” + CUSTOM ROM FOR SM-A500FU ANDROID PIE

I have Resurrection remix 7.1.2 installed on my SM-A500fu and it worked perfectly. I have been using it for some time now till I recently discovered an upgrade of the same custom rom (resurrection remix 9.0 _android pie) for SM-A500FU. I downloaded and flashed through the right process. wipe cache, system etc.. When I try flashing the upgrade via twrp recovery, I keep getting an error message saying that the rom is meant for a5ulte, a5ultexx…it goes on to list other codenames…and at the latter part it says “my phone is” but doesn’t state my phones codename.
I need help please.

Has my codename changed due to my previous ROM?
how do I know my current codename because when I boot to the download mode, my phone’s model is still SM-A500FU?
Is there a way to work around it? please urgently.

mimbogel@gmail.com

Numbers removes Byte-Order-Mark (BOM) from UTF-8 files when exported as CSV. How to fix?

I am dealing with a requirement where CSV should be UTF-8 encoded, in order to detect this in my java application I am relying on Byte Order Masks which is working perfectly fine but we found out that when we export the CSV file via Numbers it removes the BOM.

Can someone help me out with how I can avoid this?

I found a similar question but for Text Edit TextEdit removes Byte-Order-Mark (BOM) from Unicode/UTF files. How to fix?

locked out – How to fix “Unfortunately, com.android.keyguard has stopped”?

Every time, after booting up my device, I receive the following error message with a black background:

Unfortunately, com.android.keyguard has stopped.

When I tap “OK” below this message, the dialogue box quickly disappears and reappears again. I’m unable to access anything on my device. So, opening the settings app and following the steps outlined in this thread is out of my domain.

However, I managed to open my device in recovery mode by pressing the power and volume up buttons. Even after executing the following commands in the recovery mode:

  • wipe data/factory reset

  • wipe cache partition

and rebooting the device again, there was no improvement in the situation.

Other options, I get when I press the power and volume up buttons are fastboot mode and normal boot. When I chose the fastboot mode, the device just displayed the default start-up screen. As it was showing the same stuff even after hours, I used the reset pin to turn the device off (the power button didn’t have any impact during this regime). From here, I am able to do the same steps as mentioned earlier. But even after all this, the device just shows this particular error message.

While searching this site, I found this question How to fix instant lock “unfortunately com.android.systemui has stopped” on Moto G with ART which I found to be similar to that of mine but with a different error message. I find my question to be different from that because, my device didn’t have ART and I’m unable to view anything unlike the OP there, who could see some apps and widgets on the home screen. Also I have a feeling that different error messages have different methods to fix.

I also had a look at these threads – How to fix “Unfortunately, the process xxx has stopped”?, and How to fix “unfortunately , the process com.android.systemui has stopped” error?, but none of the methods described in the answers resolved my issue.

It would be very helpful if you could provide any solutions to this problem.

Thank you in advance!

I’m changing my document to a 6×9 document. When I check the document, I noticed the page numbers in the TOC are off the page. How do I fix that?

I’m changing my document to a 6×9 document. When I check the document, I noticed the page numbers in the TOC are off the page. How do I fix that?

rom flashing – My phone got bricked by encryption – any ideas how to fix it?

So I wanted to root my Redmi Note 5 pro and install a custom ROM but sadly I bricked it in the process. It started when TWRP (3.3.1-0-whyred) told me to enter a password that didn’t exist. Googled it, “default_password” didn’t work, my MI ID password didn’t work and other than that there was NO password used on the whole phone (did a factory reset before I started messing with it).

I just pressed cancel because I thought it was a bug, wiped the phone with “format data” in TWRP and installed Resurrection Remix OS V7 + magisk. Wiped the cache, rebooted, performed the first time setup and everything was dandy… Except for the fact that instead of 64gb of storage I only had 16.

So I tried it again. And again. Didn’t work. Then I found multiple people online with the same phone and the same problem who said you should change /data to another file system and then change it back. It was f2s2 so I changed it to ext4, rebooted to recovery, changed it back to f2s2, rebooted to recovery again et voilà, I was back to 64gb of storage. I did the standard TWRP factory reset, installed the ROM again and booted back to the OS. I got to the splash screen but after loading for a few minutes it takes me back to recovery mode. Now I’m stuck.

After installing a FW-less ROM of MIUI 9 (didn’t wanna risk using a rom with FW since triggering anti rollback on Xiaomi phones causes hard brick) it says this when I boot it: “Encryption was interrupted and can’t be completed. As a result, the data on your phone is no longer accessible“. There’s a reset phone button that just takes me back to recovery.

I tried three different recovery tools (TWRP, Red Wolf and Orange Fox), wiped everything multiple times, installed RR OS a few times, tried changing the file format of /data to all the different formats and install it again and finally I downloaded a Xiaomi MIUI ROM with FW but that only takes me to the “encryption failed” screen as well.

Sooooo… Time to buy a new phone or can this one be saved?

How can I fix php unit version errors?

I am trying to run the drupal_check command on the module
m face this error
I am not able to repair
& # 39; & # 39; & # 39; my_site_name_dir% vendor / bin / drupal-check -ad web / modules / contrib / social_auth_dropbox
Warning: class & # 39; PHPUnit Framework MockObject Matcher InvokedRecorder & # 39; not found in /Users/Documents/sample/my_site_name_dir/web/core/tests/bootstrap.php on line 197
0/11 (░ ° ° C ° C ° Fatal error: Drupal declaration Tests BrowserTestBase :: setUp () must be compatible with PHPUnit Framework TestCase :: setUp (): void in / Users / Documents / sample / my_site_name_dir / web / core / tests / Drupal / Tests / BrowserTestBase.php on line 39 & # 39; & # 39; & # 39; & # 39;

google search console – How can I fix the indexed issue, although blocked by robots.txt if the reported pages do not exist at all?

I found related information like How to fix Google "Indexed, although blocked by robots.txt" but that doesn't answer my question.

The pages I saw in the report do not exist at all.

enter description of image here

For example, the two links above do not exist at all. I don't know why people add a number or a image?url= to my URL. He's so weird.

How can I tell Google to ignore these URLs?

linux – how to fix the weird error "Operation not allowed"

(hadoop@worker-18 tmp)$ ./sysupdate
-bash: ./sysupdate: Operation not permitted
(hadoop@worker-18 tmp)$ chmod +x ./sysupdate
(hadoop@worker-18 tmp)$ ./sysupdate
-bash: ./sysupdate: Operation not permitted
(hadoop@worker-18 tmp)$ sudo ./sysupdate
sudo: unable to execute ./sysupdate: Operation not permitted
(hadoop@worker-18 tmp)$ ls -l ./sysupdate
-rwxrwxrwx 1 hadoop hadoop 1102480 Apr 28 07:48 ./sysupdate
(hadoop@worker-18 tmp)$ stat ./sysupdate
  File: ‘./sysupdate’
  Size: 1102480     Blocks: 2160       IO Block: 4096   regular file
Device: fd01h/64769d    Inode: 402520      Links: 1
Access: (0777/-rwxrwxrwx)  Uid: ( 1001/  hadoop)   Gid: ( 1000/  hadoop)
Access: 2020-05-08 13:02:31.919594048 +0800
Modify: 2020-04-28 07:48:11.962969475 +0800
Change: 2020-05-08 13:02:29.883603300 +0800
 Birth: -
(hadoop@worker-18 tmp)$ cp /usr/bin/ls ./
(hadoop@worker-18 tmp)$ ./ls --version
ls (GNU coreutils) 8.22

Written by Richard M. Stallman and David MacKenzie.
(hadoop@worker-18 tmp)$ chmod --reference=./sysupdate ./ls
(hadoop@worker-18 tmp)$ ls -l ./ls
-rwxrwxrwx 1 hadoop hadoop 117656 May  8 13:02 ./ls
(hadoop@worker-18 tmp)$ ./ls --version
ls (GNU coreutils) 8.22

Written by Richard M. Stallman and David MacKenzie.

(hadoop@worker-18 tmp)$ lsattr ./sysupdate
-------------e-- ./sysupdate

It's strange …

but when i downloaded it to my own server, i can run it:

➜ ~ ./sysupdate --version
screen 2.8.5
 built on Mar  8 2020 with GCC 4.8.5
 features: 64-bit AES

libuv/1.34.0

so why can't i run sysupdate on the server worker-18?

the bone is CentOS Linux release 7.4.1708 (Core)

Linux version 3.10.0-693.2.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Sep 12 22:26:13 UTC 2017

How to fix, the rest API has encountered an error

Site integrity reports:

REST API encountered an error (running php 7.3, wordpress 5.4.1, bluehost)
Performance
The REST API is a way for WordPress and other applications to communicate with the server. An example is the screen of the block editor, which relies on it to view and save your posts and pages.

The REST API request failed due to an error.
Error: cURL error 28: operation timed out after 10001 milliseconds with 0 byte received (http_request_failed)

samsung – How can I fix reset network error connection on my Android phone? Any help would be appreciated

Battery exchange network

The Stack Exchange network includes 176 question and answer communities, including Stack Overflow, the largest and most reliable online community for developers who want to learn, share knowledge and develop their careers.

Visit Stack Exchange