wine – I'm trying to install "Street Fighter IV Arcade Edition" via PlayOnLinux, but an error has occurred in the log

I'm trying to install "Arcade Edition of Street Fighter IV" via PlayOnLinux, but I get the following log error:

06/08/19 15:42:57 – [POL_System_CheckFS] Message: File System Check for vcredist_x86.exe
06/08/19 15:42:57 – [POL_Wine] Message: running wine-1.5.4-xliveless3-rawinput3 start / unix vcredist_x86.exe / q (working directory: /home/himanshu/.PlayOnLinux/ressources/vcrun2010)
06/08/19 15:42:57 – [POL_Wine] Message: Note: PlayOnLinux deliberately disables winemenubuilder. See http://www.playonlinux.com/en/page-26-Winemenubuilder.html
Wine can not find the FreeType font library. Enable Wine for
use TrueType fonts, install a FreeType version greater than
or equal to 2.0.5.
http://www.freetype.org
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
Wine can not find the FreeType font library. Enable Wine for
use TrueType fonts, install a FreeType version greater than
or equal to 2.0.5.
http://www.freetype.org
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
06/08/19 15:42:57 – [POL_Wine] Message: Return of wine: 0
Wine can not find the FreeType font library. Enable Wine for
use TrueType fonts, install a FreeType version greater than
or equal to 2.0.5.
http://www.freetype.org
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
Wine can not find the FreeType font library. Enable Wine for
use TrueType fonts, install a FreeType version greater than
or equal to 2.0.5.
http://www.freetype.org
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
err: module: load_builtin_dll could not load the .so library for built-in L "winex11.drv": libSM.so.6: can not open the shared object file : no such file or directory
The application tried to create a window, but no driver could be loaded.
Unknown error (127).
err: systray: initialize_systray Can not create taskbar window
The application tried to create a window, but no driver could be loaded.
Unknown error (127).

Although I have installed freetype from the following command on the terminal but I still get the same error.
sudo apt update & sudo apt install freetype2-demos

Canon – How to connect a Yongnuo YN 600 EX RT flash to a Yongnuo YN 560 IV flash master in receiver mode

Since the YN600EX-RT uses the Canon RT wireless radio protocol and the YN560 IV uses the older Yongnuo YN560 / RF605 / RF603 protocol, the YN600EX-RT can not communicate directly with the YN560 IV. They use the same wireless frequencies, but each uses a different "language" to communicate the same information.

The simplest solution would probably be to use a YNE3-RX receiver connected to the hot foot of the YN560 IV. This could allow you to set the manual remote feed, but this may not be the case. If the YNE3-RX does not fire the flash when it is directly connected to the YN560 IV heating foot, you can either:

  • Use a PC cord between the YNE3-RX and the YN560 IV to send a "fire" command. All settings of the flash settings must be made directly on the flash.
  • Place tape on the YNE3-RX's TTL contacts and attach to the YN560 IV's hot foot. The receiver would only send a flash fire command via the main pin. All settings of the flash settings must be made directly on the flash.

How to connect the YN 600 EX RT as a master with the YN 560 IV in receiver mode

I want to associate YN 600 EX RT as a master to YN 560 IV as a receiver for the master to communicate.

bash – fc command somehow mapped to iv

I would like to use the fc command 1. However, when I type fc at bash I get

The command & # 39; iv & # 39; iv & # 39; can not be found, but can be installed with:

sudo apt install openimageio-tools

It's weird because I did not even type it iv. In addition, the suggested package seems to be an image processing library that is far from what I want.

What's going on here and how can I use fc?

Focal length Sony RX10 iv

I have a Sony Rx 10 iv. I've used the maximum zoom, 600 mm, but when editing in Lightroom in the details, the focal length is 220 mm.

Can any one explain, please?

Canon eos mark 1 iv

the camera turns on and some functions work-but the main screen does not show up, nor do the menu options ??? can this be due to the failure of the button cell? David

sdcard – How to prevent the Canon 5D Mk IV from automatically switching to the SD card when the CF card is removed?

I have a CF card and an SD card in a 5D Mk IV when shooting.
"Record func + map / folder salt." is set to "Standard" and the camera is set to use the CF card.

However, every time I turn off the camera and I remove the CF card to import pictures to my computer, the camera automatically switches to the SD card the next time I l & # 39; 39, turns on even if I do not turn on the camera until the CF card is not in place. back in the camera.

Does someone encounter the same problem and can anyone tell me how I can avoid having to specify which card to register each time?

testing – What is the relationship between IV & V professionals, testers and quality assurance engineers?

In the context of SDLC, I know that Verification AND VALIDATION is to check the deliverable input of the previous phase and to validate the output of the current one.
And this test is a phase among the SDLC phases.

Based on my research, I found in UToronto course notes:

V & V performed by a separate contractor

Which means that IV & V professionals are externally involved in the SDLC process and therefore have nothing to do with the test phase.

By cons, I find on another course that:

The test is the most common but not the only form of V & V

Which means that the testers are involved in IV & V.

This puzzles me as to whether the test phase and IV & V are performed by the same person (say a QA engineer) or if the people who perform IV & V are not involved in the testing phase.

Does the work of V & V professional exist in the software industry? What is the relationship between QA engineers, testers and IV & V?

How is the V & V process involved in project management: Is it running continuously within SDLC at the beginning or end?

Does the SDLC also include IV & V as a scene?

Canon 4000D YN560 IV flash with RF605C trigger

I want to know if the 4000D cannon supports the YN560 IV flash with RF605C trigger? If so, how can I configure it?

canon 5d mark iv – Are the autofocus settings independent of the selected case?

Canon's AI Servo AF autofocus behavior can be changed by choosing one of six presets and can be further customized by adjusting the Tracking the sensitivity, Acceleration / deceleration tracking and Automatic AF point switching settings.

If I set the three parameters to the same value in two different cases, do they both behave the same way?

for example. would have Case 1 to be equal to Case 6 if I put Tracking the sensitivity, Acceleration / deceleration tracking and Automatic AF point switching exactly the same values ​​in both cases or will they behave differently?